&In daily use, we should pay attention to the professional maintenance and maintenance of the punching machine, which can greatly improve its service life, and can ensure that the whole working process is more smooth. Through regular maintenance, the quality of the workpiece can be guaranteed, In daily life, the power system should be mainly maintained. Then how to maintain the steel punching machine? < br style = "list style type: none;" / > the first regular correction of mold position < br style = "list style type: none;" / > in the long-term use process, the mold position of the steel punching machine will change slightly, Therefore, it is necessary to regularly correct the mold, check whether the mold is displaced, and check whether it is loose. Regular reinforcement is also one of the important contents of maintenance. < br style = "list style type: none; "/ > Second, check that there is no significant wear on the conveyor V-belt < br style = list style type: none;" / > because the punching materials of professional steel punching machines are quite different, the wear degree of traditional V-belts is also different. Especially for large-scale workpieces or heavy and hard materials, the inspection of conveyor V-belts should be focused on, At the same time, remind the conveyor belt to be replaced regularly to avoid affecting the overall stability of the equipment. < br style = "list style type: none;" / > Third, the screw tightening of each component < br style = "list style type: none;" / > will produce large vibration when the punching machine is working, Therefore, various parts of the equipment will have different degrees of screw loosening, which is related to the safety of the equipment and the processing quality of the workpiece. Therefore, it is necessary to strengthen the screws of each part regularly, and use a hexagon wrench to try to move it gently to prevent it from tripping. < br style = "list style type: none;" / > the fourth lubricating point is filled with oil < br style = "list style type: none; "/ > in the daily maintenance of strip punching machine with high evaluation, it is also necessary to add oil to each lubricating point. In order to prevent excessive friction between various mechanical parts, which may cause excessive wear or noise, it is necessary to add oil to each lubricating point regularly, and the amount of oil should not be too much for a single time, which can be used for lubrication. < br style = list style type: none; "/ > the above are the four major methods for daily maintenance of the steel punching machine. Maintenance personnel should not ignore the maintenance of the punch base. In addition to keeping the bottom clean, they should also tighten the screws of the base. If the screws of the base are loose, the overall shaking will occur, which will greatly affect the stability of the machine