The embedded parts manufacturing enterprises will select the type of channel steel punching machine according to the process nature, batch size, geometric dimension and accuracy level of the parts to be completed. After purchasing the appropriate type of channel steel punching machine, it is necessary to operate in the correct way, and do a good job of safety protection, which can improve the safety of production and the quality of material processing. So how to improve the safety of channel steel punching machine? Take a look at the following three points. First of all, the safety operation rules of channel steel punching machine should be observed. When the punching equipment is in place, the chassis should be leveled and stabilized, the punching frame should be vertical, and the grounding protection should be done according to the construction power requirements. Secondly, before starting work, carefully check whether each component is properly configured and whether the fastening part is loose and falling off. If there is any abnormality, it should be handled correctly in time. The channel steel punching machine is usually equipped with a variety of protection devices, which can improve the safety protection performance of channel steel punching machine and effectively reduce the accident rate in operation. In addition, operators should wear all kinds of armor and clean up the sundries on the machine and around the machine according to the requirements. Irrelevant personnel should not be close to the working area when the punching machine is running.     3. In order to improve the safety of operation in the production process, the operators should not only strictly abide by their posts, but also put all the tools and accessories on the channel steel punching machine in the specified positions, and do not randomly place them, so as to avoid the impact on the equipment and the occurrence of accidents during the operation of the punching machine.     When we operate the channel steel punching machine, we can carry out according to the regulations, and do a good job in the relevant inspection work, and at the same time improve the safety awareness, then we can effectively improve the operation safety of the channel steel punching machine, which can not only make employees work more secure, but also improve the efficiency of production and processing, and save the cost of handling accidents for enterprises.