CNC drilling machine is mainly used for drilling, reaming, reaming, tapping and other processing. Because of the development of machining center, most of CNC drilling machines have been replaced by machining centers. Now we will learn about the operation of CNC drilling machine specifications! Before working, carefully check whether the grid voltage, oil pump, lubrication and oil quantity are normal, check whether the pressure, cooling, oil pipe, cutting tool and fixture are in good condition, and make regular maintenance of the machine tool. After the machine tool is powered on and started, the machine tool shall be returned to zero first, and then run for 5 minutes. After confirming that the machine tool, tool, fixture, workpiece and NC parameters are correct, the machine can start to work normally. 3. Carefully check whether the programming, parameter setting, action sequencing, tool interference, workpiece clamping, switch protection and other links are completely correct, so as to avoid accidents and damage to the tools and related parts during the cycle processing. Test cutting and tool setting should be carried out strictly according to the operation process, and the program protection work should be done well after debugging. During automatic circulation processing, the protective sliding door should be closed. When the spindle rotates and manual operation is required, make sure that your body and clothes are far away from rotating and moving parts, so as to avoid involving clothes into accidents. < br style = "list style type: none;" / > & nbsp; & nbsp; 5. The loading operation of spindle or turret tool magazine must be carried out under the state of mechanical movement stop, and the cooperation between cooperation personnel should be paid attention to to to avoid accidents. When changing the tool manually or automatically, pay attention to the installation position of the turret, magazine, manipulator rotation and tool, etc., and keep the body and head away from the rotating part of the tool to avoid collision. For the machine tool of machining center, the corresponding relationship between tool set number and tool number should be checked to prevent tool change interference or tool collision caused by tool number confusion. When clamping the workpiece, clamp it firmly to avoid accidents caused by flying out of the workpiece. After clamping, pay attention to take out the chuck wrench and other adjustment tools to avoid accidents caused by spindle rotation. The operator of the machine tool should be able to deal with the general alarm fault. In case of serious fault, the machine tool operator should be able to cut off the power quickly, protect the site, report in time and make records. < br style = "list style type: none;" / > & nbsp; & nbsp; 8. After the work is finished, the machine tool guide rail and worktable should be cleaned, and the work log should be filled in carefully. < br style = "list style type: none;" / > & nbsp; & nbsp; do you understand the above operating procedures for CNC drilling machines? If there are problems related to CNC plane drilling machine, please consult.